How To Clean Intake Manifold 1998 Ford F150

How to Clean an EGR Valve on a Ford F150

past Johnathan Cronk

motor epitome by Petr Efremov from Fotolia.com

Your Ford F150 is equipped with a special valve called the "exhaust gas recirculation valve," or the EGR valve. The EGR valve plays a very important office in the proper functioning of your vehicle'due south frazzle system. The valve directs exhaust into the intake manifold, where the exhaust is cooled. This procedure is crucial to the life of your vehicle, as it prevents the engine and other components from overheating and becoming damaged. Over time, the valve will become dirty and clogged, and then it is important to clean the EGR valve to ensure it operates properly.

Step 1

Ensure the Ford F150 is set in "Park" on a level surface. Exit the vehicle to sit and absurd for a half hour.

Step 2

Open up the hood of the F150 and locate the exhaust gas recirculation valve. Wait for the valve on the engine intake manifold; the valve is a small, circular, metal component.

Step 3

Loosen the bolts that secure the valve in place, using a socket wrench. Once all bolts are loose enough, remove them and identify them to the side. Remove the valve from the manifold; this may require a bit of force due to carbon buildup.

Step 4

Clean the inside and the outside of the valve with carburetor cleaner. Articulate away carbon build-upwards, using a wire brush and rag. Spray cleaner on the valve mountain and wipe away with a rag--this will ensure a clean connectedness.

Reinstall the valve onto the valve mount. Place each commodities back onto the valve and tighten with the socket wrench. Once all bolts are replaced and tightened, shut the hood of the F150.

References

Things You'll Demand

Writer Bio